5th line: This is a safety system that comes with many of 2005 kites. It attaches to your harness and when activated
flies the kite with the leading edge into the wind = no power
Bar or control bar: The steering component of the kite
BKSA: British Kite Surfing Association
Bladder: The inner tube found in the struts and leading edge of an inflatable kite. Works the same way as a bike
inner tube but looks like a giant condom.
Board: The thing you stand on when kiting
Bridle: The name given to extra lines around the kite. It allows a kite to fly 2 line or may be used to solidly hold
the kite in its shape
Buoyancy aid: Flotation jacket designed to keep you afloat. Not to be confused with a life jacket which, technically,
will keep your head above water if unconscious
Canopy: The material that links the struts and the leading edge. The canopy is the most visable part of the kite.
Carbon: Strong, lightweight but expensive material used in controls bars, wing tip batterns and boards.
Chicken loop: The loop below the control bar where you hook into with your harness hook
Cross Shore: Wind blowing directly parallelÜ to the shore, also known as side shore
Depower strap: An adjustable strap above the depower line in arms reach from the bar. It allows you to make the
kite more or less powerful.
Fin: The little things that screw into the bottom of your board to provide grip
Flex: The amount of bend in a board
Harness bar: A metal bar with a hook that is part of the harness. Often has to be bought separately to the harness, but
the shop won’t forget to tell you that! If you are buying a harness second hand make sure you check to see if it comes with
the harness bar.
Harness: Worn around the kiters waist or bum. They have a metal bar with a hook that hooks into the chicken loop on
the control bar taking the power from the kiters arms and distributing it through the whole body.
Helmet: A hard head protection that should have a strap that goes under your chin. An essential piece of equipment
for a beginner
IKO: International Kitesurfing Organisation
Impact jacket: A jacket with slight amount of flotation, but is designed to absorb some of the impact after
Kite knife: A hook shaped knife where the gap between the plastic and the knife is only big enough for the lines
to fit through. Allows you to cut yourself free in case of a dangerous tangle!!!
Kite: The thing that flies in the air
Kite pants: The fashion accessory worn over your wetsuit. Can be boardies or full length pants
Larks head: The self tightening knot used to attach the lines to the kite
Leader lines: A thinker line that runs from the bar up to the kite lines
Leading edge: The main inflatable tube (biggest) that gives the kite it’s characteristic arc shape.
Leash: The strong line that attaches you to either your kite or your board. If using aboard leash you must always
wear a helmet.
L.E.I. Leading Edge Inflatable
Lines: These are the lines that run from the control bar and attach via a larks head knot to the pigtails on the
kite. They are made out of dynema and strenth is measured in pounds. There are back lines also known as outside lines and
front lines also known as inside lines
Neoprene: A synthetic rubber produced in a variety of thicknesses resulting in garments with varying degrees of
Offshore: A wind blowing directly away from the shore
Onshore: A wind blowing directly onto the shore
Pig tails: The bits of rope that come off the wing tips of the kite. This is where the lines attach to from
Planing: When the board starts to ‘skim’ across the top of the water at speed rather than ‘ploughing’ through it
Port tac: When you are going along and your left hand is on the front of the bar
Quiver: A name used to describe all your kites. For example, “my quiver consists of a 9m and a 12m”
Rail: The heel edge or toeside edge of the board
Recon: A safety system that comes only with cabrinha. It releases the front lines causing the kite to fold and
loose power on the recon activation. The recon also provides an easy means of relaunching
Rigging: Inflating the kite then attaching the lines before your session so it doesn’t blow away.
Rocker: The arc shape of the bottom of the board. Varies dramatically from brand to brand
Run: The distance you go from left to right and then right to left
Safety system: A system designed to allow you to ditch the power in a kite allowing you a way to deal with dangerous
situations which may arise.
Sheet in: When you pull the kite torwards the chicken loop, shortening the back lines in relation to the front lines,
bringing the trailing edge into the wind making it more powerful
Sheet out: When you push the kite away from the chicken loop, lengthening the back lines in relation to the front
lines, moving the trailing edge out of the wind to reduce the power in the kite
Starboard tac: When your are going along and your right hand is on the front of the bar
Struts: The inflatable tubes that go along the canopy
Tide: The vertical and horizontal movements of the oceans caused by the gravitational pull of the moon, sun and by
the rotation of the earth. On average, in the UK, we get 2 high tides and 2 low tides in one day (24 hours). So if it is
low tide at 9am in the morning, it will be high tide 6 hrs later at 3pm in the afternoon and low tide again at 9pm at
Trailing edge: The back edge of the kite
Transition: The way you turn at the end of each run
Water start: This is when you are sat in the water with your board on your feet. It’s when you use the kite to you
into the position for riding.
Wetsuit: Neoprene insulating suit worn for warmth in and out of the water
Wing tip: The ends of the kite. Many kites have batterns in the wing tips to provide greater strength and improved